Safety Program

Our Safety Commitment

A1 Duran Roofing, Inc. is dedicated to the prevention of jobsite injuries and the promotion of safe working conditions on every project. Every employee is responsible for working safely, following company safety procedures, using required personal protective equipment, and reporting unsafe conditions immediately.

Fall Protection Program

Fall protection is a major part of our roofing safety program. A1 Duran Roofing, Inc. evaluates elevated work areas and roof conditions to determine the proper fall protection system required for each project.

Fall protection systems may include guardrails, warning lines, personal fall arrest systems, personal fall restraint systems, anchorage devices, covers, controlled access zones, and other protective measures based on the specific jobsite conditions.

Fall Protection Training

Employees are not permitted to work in areas where fall hazards exist or use fall protection equipment until they have received proper training. Training may include:

• Recognition of fall hazards in the work area
• Proper use of guardrails, warning lines, and fall arrest systems
• Selection and inspection of full-body harnesses and lanyards
• Anchorage and tie-off requirements
• Free-fall distance and swing-fall hazard awareness
• Emergency retrieval and rescue procedures
• Removal of damaged or defective equipment from service

Jobsite and Work Area Evaluation

Before work begins, supervisors or foremen assess the jobsite for potential hazards. This evaluation helps determine what safety systems, equipment, and procedures are needed for the work being performed.

Jobsite evaluations may include reviewing:

• Whether work must be performed at elevation
• Open roof edges, floor holes, skylights, or other openings
• Whether guardrails, barricades, or warning lines are required
• Whether aerial lifts, platforms, or other equipment can improve safety
• Whether personal fall arrest systems are required
• Whether a job-specific fall protection plan is needed

Fall Protection Systems

Floor Holes and Openings

Floor holes, roof openings, skylights, and similar hazards must be properly protected. Covers, guardrails, or personal fall arrest systems may be used depending on the condition and exposure.

• Covers must be secured to prevent accidental displacement.
• Covers must be strong enough to support employees, equipment, and materials.
• Covers should be clearly marked with warning labels such as “HOLE” or “COVER.”

Guardrail Systems

Guardrails may be used to protect employees from unprotected edges, openings, and fall hazards. Guardrails must be properly installed, maintained, and inspected.

Warning Line Systems

Warning lines may be used on low-slope roofs to identify controlled work areas and warn employees when they are approaching an unprotected roof edge or hazard area.

Personal Fall Arrest Systems

Personal fall arrest systems may include a full-body harness, lanyard, lifeline, shock absorber, self-locking snap hook, rope grab, self-retracting lifeline, and approved anchorage. Equipment must be inspected before use and removed from service if damaged or exposed to a fall or impact load.

Equipment Inspection and Maintenance

Safety equipment must be maintained in proper working condition. Fall protection systems, anchors, harnesses, lanyards, warning lines, guardrails, covers, and related equipment are inspected regularly and according to manufacturer recommendations.

• Fall protection equipment is inspected before use.
• Damaged or defective equipment is removed from service immediately.
• Anchors and mounting points are inspected before use.
• Guardrails, covers, and warning lines are monitored throughout the workday.

Portable Equipment, Aerial Lifts, and Crane Safety

A1 Duran Roofing, Inc. requires safe handling, inspection, and operation of jobsite equipment. Only trained and authorized workers may operate aerial lifts, material-handling equipment, cranes, or other specialized equipment.

• Portable equipment must be secured when not in active use.
• Operators must follow manufacturer requirements and load-capacity limits.
• Crane and rigging equipment must be inspected and properly maintained.
• Material hoisting must be coordinated to protect workers and the public.
• Work may be suspended during unsafe weather conditions.

Severe Weather Safety

Roofing work may be affected by high winds, lightning, heavy rain, or other severe weather. A1 Duran Roofing, Inc. takes appropriate precautions to protect workers, materials, equipment, and the public during changing weather conditions.

• Materials and supplies are secured to prevent flying debris.
• Hoisting activities may be stopped during unsafe wind conditions.
• Outdoor work may be suspended when lightning is near the jobsite.
• Workers are directed to safe areas during emergency weather events.

Material Storage and Roof Access

Materials must be stored, staged, and secured in a way that reduces the risk of displacement, falling objects, blocked access, or damage to the work area. Roof access points must be controlled to prevent unauthorized access to construction areas.

• Materials are stored away from roof edges whenever possible.
• Storage areas may be protected with barricades or fencing.
• Access points, stairs, scaffolds, and roof-entry locations are monitored.
• Only authorized workers may access active roof construction areas.

Fire Protection and Torch-Applied Roofing Safety

Torch-applied roofing operations require special precautions because of the heat and fire risks involved. Workers involved in torch-applied roofing must be trained and must follow safe work procedures.

• Proper personal protective equipment must be worn.
• Combustible materials must be identified and controlled.
• Torch equipment must be inspected before use.
• Leaking propane equipment must not be used.
• Fire extinguishers must be available near torch operations.
• Fire watch procedures must be followed after torching work is completed.

Emergency Response and First Aid

A1 Duran Roofing, Inc. maintains emergency response procedures to address jobsite incidents, injuries, fire, property damage, public exposure, and other emergency situations.

The highest-ranking supervisor on site is responsible for coordinating the initial response during an emergency and contacting the appropriate emergency services, project representatives, or authorities when needed.

• Emergency contact information should be posted and accessible.
• Jobsite personnel should know emergency procedures and evacuation routes.
• Injuries and incidents must be reported immediately.
• First aid supplies should be available on site.
• Accidents and near-misses are reviewed to help prevent future incidents.

Heat Exposure and Worker Wellness

Roofing work in South Florida can involve high temperatures and sun exposure. A1 Duran Roofing, Inc. encourages employees to take proper precautions to reduce heat-related risks.

• Drink fluids regularly.
• Take short and frequent breaks when needed.
• Recognize personal limitations.
• Report symptoms of heat stress immediately.
• Use proper protective clothing and equipment.

Protecting the General Public

A1 Duran Roofing, Inc. takes precautions to help protect pedestrians, building occupants, visitors, vehicles, and surrounding property during roofing operations.

• Work areas, sidewalks, entrances, stairways, and roadways are protected when required.
• Barricades, fences, signs, tarps, covers, and shields may be used where appropriate.
• Travel ways, emergency exits, and access points are kept clear of obstructions.
• Flag persons may be used when moving equipment near pedestrians or vehicles.
• Overhead protection may be provided where required by site conditions or local rules.

Hazard Communication and Safety Data Sheets

Safety Data Sheets, also known as SDS, are maintained for hazardous chemicals used on applicable jobsites. These documents provide important information about product handling, health hazards, storage, protective equipment, spill response, and disposal requirements.

Employees are expected to follow product labels, manufacturer instructions, and applicable safety procedures when handling chemicals, roofing materials, coatings, adhesives, fuels, and related products.

Accountability and Continuous Improvement

Safety is everyone’s responsibility. Management, supervisors, foremen, safety personnel, and employees all play a role in maintaining a safe work environment.

• Management provides resources, equipment, staffing, and support for safe work.
• Safety personnel help maintain training, inspections, and safety records.
• Supervisors and foremen enforce safety procedures on the jobsite.
• Employees must follow safety rules and report hazards immediately.
• Accidents and near-misses are reviewed to identify corrective action.
• Safety procedures may be updated as projects, regulations, or conditions change.

A1 Duran Roofing, Inc. encourages employees to provide feedback and safety suggestions. Continuous improvement is an important part of maintaining a strong safety culture.